🏗️ Robot Structural Analysis — Complete Learning Outline
A clean course-style folder outline (Project Setup → Modeling → Design → Reports) for your Robot training files.
```Tip: search matches will highlight and auto-open the related sections.
```📌 Table of Contents
1
Project Setup & Interface Basics
Toolbar, project structure type, templates, rebar & material properties.
1.3
Toolbar & Project Structure Introduction
Learn the interface and the structure type workflow.
- MP4 How to Use Toolbar
- MP4 1.3a Introduce Project Structure Type
- MP4 1.3b Introduce Project Structure Type
- MP4 1.3c Introduce Project Structure Type
1.4
Template & Material Definition
Prepare template + local rebar + material properties.
- MP4 1.4 Define Template
- XLSX Rebar in Cambodia
- XMCD Properties of Material
2
Structural Modeling & Load Definition
Architectural plan → axes → sections → modeling → loads → analysis → stability.
2.1
Architectural Plan Interpretation & Combine Loads
Understand plan + load paths + load references (ASCE wind).
- MP4 2.1a Explain Architectural Plan and Combine Load
- DWG 2.1a Hotel Architectural Plan
- MP4 2.1b Explain Architectural Plan and Combine Load
- MP4 2.1c Explain Architectural Plan and Combine Load
- PDF ASCE 7-16 (Minimum Design Loads for Buildings and Other Structures)
- XMCD Load on Structure
- XMCD Wind Load ASCE 7-16 (MWFRS)
- PDF YONG-SOON_PASSENGER-LIFT
2.2
Axis Definition & Building Height Setup
Create grid lines and story elevations correctly.
- Folder 2.2 Define Axis Definition & Height of Building
2.3
Section Definition According to Architectural Plan
Define member sizes and match the architectural intent.
- MP4 2.3a Define Section Follow to Architectural Plan
- MP4 2.3b Define Section Follow to Architectural Plan
- XMCD Define Section
2.4
Modeling & Verification
Build the 3D model and verify connectivity, supports, and members.
- MP4 2.4a Modeling & Verification
- MP4 2.4b Modeling & Verification
- MP4 2.4c Modeling & Verification
- MP4 2.4d Modeling & Verification
- MP4 2.4e Modeling & Verification
- MP4 2.4f Modeling & Verification
- MP4 2.4g Modeling & Verification
2.5
Load Types, Load Assignment & Load Combinations
Define loads + apply them + combine for design.
- MP4 2.5a Define load type, assign load and load combination
- MP4 2.5b Define load type, assign load and load combination
- MP4 2.5c Define load type, assign load and load combination
- MP4 2.5d Define load type, assign load and load combination
- MP4 2.5e Define load type, assign load and load combination
- MP4 2.5f Define load type, assign load and load combination
- XMCD Load Combination
- XMCD Load on Structure
- XMCD Wind Load ASCE 7-16 (MWFRS)
2.6
Analysis & Internal Force Checking
Run analysis and review forces for design.
- MP4 2.6a Analysis & Check Internal Force
- MP4 2.6b Analysis & Check Internal Force
- MP4 2.6c Analysis & Check Internal Force
- MP4 2.6d Analysis & Check Internal Force
- MP4 2.6e Analysis & Check Internal Force
2.7
Stability Check
Verify global stability, drift, sway, and structural behavior.
- Folder 2.7 Check Stability of Building
3
Structural Design Modules
Slab → Beam → Column → Shear Wall → Foundation design outputs.
3.1
Slab Design
Coefficient method + calculation sheet references.
- MP4 3.1a Slab Design
- MP4 3.1b Slab Design
- XMCD Design Slab (Coefficient Method)
- PNG polar-rectangular-coordinates
3.2
Beam Design
Support & midspan design + detailing references.
- MP4 3.2a Beam Design
- MP4 3.2b Beam Design
- RTF Report Beam Design
- XMCD Beam Design at Support
- XMCD Beam Design at Middle
- PNG Bent Bar
3.3
Column Design
Strength + buckling + effective length + sway checks.
- MP4 3.3a Column Design
- MP4 3.3b Column Design
- RTF Report Column Design
- PNG Buckling Mode
- XLSX Check Sway or Nonsway
- XMCD Column Design
- XMCD Define k Effective Length Factor
- RTF Report C1648
3.4
Shear Wall Design
Loads → Mathcad checks → design report + detailing images.
- MP4 3.4a Shear Wall Design
- MP4 3.4b Shear Wall Design
- XLSX Load From Robot
- XLS Load to Mathcad
- RTF Report Design Shear Wall
- XMCD Shear Wall Design
- PNG Shear Wall
3.5
Foundation Design
Isolated footing + pile cap + parameters + references.
- MP4 3.5a Isolate Footing
- MP4 3.5b Isolate Footing
- MP4 3.5c Isolate Footing
- PDF Designations of modules in Robot
- RTF Foundation91
- XMCD Isolate Footing Design
- XMCD Pile Cap (Hotel)
- XMCD Reference Foundation
- PNG/JPG Foundation Types (images)
- PDF Define Foundation Parameter
4
Reports & Calculation Notes
RTF/DOCX/PDF outputs for submission + documentation.
4.1
Calculation Note (Reports Package)
All design reports and references in one place.
- MP4 4.1 Calculation Note
- RTF Report Slab
- RTF Report Beam Design
- RTF Report Column Design
- RTF Report Design Shear Wall
- RTF Foundation91
- DOCX CALCULATION NOTE
- PDF CALCULATION NOTE
- PDF Data Section
- DOCX Material
4.2
Final Calculation Documentation
Final compilation and submission-ready set.
- Folder 4.2 Calculation Note